Hulls

The hull is the structure on which buoyancy depends. The hull can be divided into live work or hull and topsides. The hull is the part immersed in water, and, therefore, is the one most exposed to corrosive phenomena and oxidation of the metal parts, as sea water is an excellent electrolyte for triggering corrosion; for this reason it is necessary to protect the hulls with a cathodic protection provided by the zinc anodes. For best results, it is recommended to install anodes in the exact number and size specified by the boat designer. MTO Nautica, however, supports its customers by also offering them a consultancy and installation service, based on the material with which the hull is built and based on the type of use of the boat, that is, if it is stationary in port or if it has to go out. at sea.

93 Products

- 15%

Hulls

Pipe f. exhaust system RINa + LLOYD 101x113 mm

Pipe f. exhaust system RINa + LLOYD 110x123 mm

Pipe f. exhaust system RINa + LLOYD 152x168 mm

Pipe f. exhaust system RINa + LLOYD 200x220 mm

Ogive Zinc Anode Complete with Conical Brass

Ogive Zinc Anode Complete with Hex Brass

Zinc Type Solè Spinner

Zinc Spinner Reggiani Nautica Int. Cylindrical

Zinc Type Ferretti Spinner

Cutted coned ogive d25mm

Anode ogive esa vetus kgf 220 zn

Anode ogive esa vetus kgf 125 zn

Anode ogive insert s/steel bcs d68mm zn

Anode ogive esa mount vetus zn

Anode collar vetus kgf 25ster zn

Anode small plate vetus kgf 23a/50/80 zn

Anode ogive max power zn

Anode ogive sleipner sp30/40 zn

Anode ogive sleipner sp125 zn

Anode ogive sleipner sp55 zn

Anode collar vetus kgf 35/55 zn

Anode collar vetus kgf 60/75 zn

Anode ogive side power zn

Anode ogive lewmar 140 zn

Hulls

Email Newsletter