Hulls

The hull is the structure on which buoyancy depends. The hull can be divided into live work or hull and topsides. The hull is the part immersed in water, and, therefore, is the one most exposed to corrosive phenomena and oxidation of the metal parts, as sea water is an excellent electrolyte for triggering corrosion; for this reason it is necessary to protect the hulls with a cathodic protection provided by the zinc anodes. For best results, it is recommended to install anodes in the exact number and size specified by the boat designer. MTO Nautica, however, supports its customers by also offering them a consultancy and installation service, based on the material with which the hull is built and based on the type of use of the boat, that is, if it is stationary in port or if it has to go out. at sea.

155 Products

- 21%

Hulls

Welding anode 1000 g

Aluminium welding anode 390 g

Rectangular anode w/insert 95x34x17 mm

Rectangular anode w/insert 96x40x25 mm

Rectangular anode w/insert 127x60x25 mm

Zinc anode for bolt mounting 3000 g

Aluminium anode for bolt mounting 200 mm

Magnesium anode for bolt mounting 200 mm

Rose anode bolt mounting Ø 50 mm 100 g

Rose anode bolt mounting Ø 70 mm 225 g

Rose anode bolt mounting Ø 90 mm 445 g

Rose anode bolt mounting Ø 110 mm 690 g

Rose anode bolt mounting Ø 125 mm 1080 g

Rose anode bolt mounting Ø 140 mm 1570 g

Rose magnesium anode bolt mounting Ø 50 mm 100 g

Rose magnesium anode bolt mounting Ø 70 mm 225 g

Rose magnesium anode bolt mounting Ø 90 mm 445 g

Rose magnesium anode bolt mounting Ø110 mm 690 g

Hidden mounting magnesium anode Ø 135 mm

Bolting anode 1200 g

Bolting anode 1500 g

Bolting anode 2500 g

Bolting anode 4250 g

Bolting anode 8000 g

Hulls

Email Newsletter